106
Appendix
Magnetism, electrostatic charge, and radio interference
Do not use this product near a microwave oven or any other area where magnetism,
electrostatic charge, or radio interference is generated. Radio wave reception may be
poor in certain environments.
Also note that other devices using the same 2.4GHz band used by this product may
cause reduced processing speeds in both devices.
Connecting to a public LAN
This product does not support wireless LAN connection over a public wireless LAN
environment.
Intended Areas of Use
1)The wireless LAN functions of this camera are provided for use in the countries and
geographic areas below.
Hong Kong, Singapore, Thailand, The United Arab Emirates (UAE), Paraguay,
Venezuela, Panama, Germany, Austria, France, The Netherlands, Spain, Italy, Sweden,
Denmark, Slovakia, Poland, and Norway
2)Approval for use under radio regulations in the countries and geographic areas below is
granted only when the camera is purchased within that particular country or geographic
area.
Taiwan, Indonesia, Malaysia, and South Korea
.
Discarding or Transferring Ownership of a Memory Card or the
Camera
The format and delete functions of the camera do not actually delete files from the
memory card. The original data remains on the card. Note that responsibility for the
data on a memory card lies with you. The following procedures are recommended
whenever you discard a memory card or the camera, or if you transfer ownership to
another party.
• When discarding a memory card, either physically destroy the memory card or use
commercially available data delete software to completely delete the data on the
memory card.
• When transferring ownership of a memory card to another party, use commercially
available data deletion software to completely delete the data on it.
• Use the format function (page 95) to completely delete the data in built-in memory
before discarding or transferring ownership of the camera.
.
Other Precautions
The camera becomes slightly warm during use. This is normal and does not indicate
malfunction.
