background image

53

Advanced Settings

Procedure

Enter the REC Mode 

*

 [MENU] 

*

 “REC” Tab 

*

 L/R Key

You can assign one of the four functions listed below to the [

4

] and [

6

] keys.

*

Triple Self-timer cannot be selected while ART SHOT is the recording mode or 
while “On” is selected for “Make-up”. While “On” is selected for Continuous Shutter 
(CS) or Silent mode, the [

4

] and [

6

] keys cannot be used to change the self-timer 

time.

NOTE

• The “L/R Key” setting cannot be used together with the following feature.

– Premium Auto

Procedure

Enter the REC Mode 

*

 [MENU] 

*

 “REC” Tab 

*

 Grid

The on-screen grid can be displayed on the REC mode 
monitor screen for easy vertical and horizontal alignment 
when composing images.

Assigning Functions to the [

4

] and [

6

] Keys (L/R Key)

Setting

[

4

]/[

6

] key operation

EV Shift

Adjusts the EV shift value (page 56).

White Balance

Changes the white balance setting (page 57).

ISO

Changes the ISO Sensitivity setting (page 59).

Self-timer

*

Sets the self-timer time (page 41).

Off

Cancels [

4

] and [

6

] key assignments.

Displaying the On-screen Grid (Grid)

Summary of Contents for EX-MR1































































































































Reviews: