manualshive.com logo in svg

Casio EX-MR1, User Manual

Share
Download
Casio EX-MR1 User Manual Download Page 85

85

Using the Camera with a Computer

.

To view copied images

1.

Double-click the camera’s drive icon.

2.

Double-click the “DCIM” folder to open it.

3.

Double-click the folder that contains the images you want to view.

4.

Double-click the image file you want to view.

• For information about file names, see “Memory Folder Structure” on page 87.
• An image that was rotated on the camera will be displayed on your Macintosh 

screen in its original (unrotated) orientation.

To play back a movie, first copy it to your Macintosh and then double-click the movie 
file.

.

Minimum Computer System Requirements for Movie Playback

The minimum system requirements described below are necessary to play back 
movies recorded with this camera on a computer.

• The above are recommended system environments. Configuring one of these 

environments does not guarantee proper operation.

• Certain settings and other installed software may interfere with proper playback of 

movies.

.

Movie Playback Precautions

Proper movie playback may not be possible on some Macintosh models. If you 
experience problems, try the following.

– Change the movie image quality setting to “STD”.
– Shut down other applications that are running.

IMPORTANT!

• Be sure to move the movie data to the hard disk of your Macintosh before trying to 

play it. Proper movie playback may not be possible for data accessed over a 
network, from a memory card, etc.

Playing a Movie

Operating System :Mac OS X 10.5 or higher
Required Software:QuickTime Player (installed on computer)

Summary of Contents for EX-MR1































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands