Casio EX-MR1 User Manual Download

Page: 61 / 126

Viewing Snapshots and Movies

Viewing Snapshots and Movies

See page 31 for the procedure for viewing snapshots.

Press [

] (PLAY) and then use [

] and [

] to display the movie you

want to view.

Press [

] (Movie) to start

playback.

Movie Playback Controls

NOTE

• Playback may not be possible for movies not recorded with this camera.

Viewing Snapshots

Viewing a Movie

Fast forward/
fast reverse

[

] [

]

• Each press of either button increases the speed of the fast

forward or fast reverse operation.

• To return to normal playback speed, press [SET].

Play/pause

[SET]

1 frame forward/
back

[

] [

]

• Holding down either button scrolls continuously.

Volume
adjustment

Press [

] and then press [

] [

• Volume can be adjusted only while movie playback is in

progress.

Stop playback

[

] (Movie)

Movie icon:

Recording time

Image quality

Summary of Contents for EX-MR1































































































































Search results

Summary of Contents for EX-MR1

Reviews:

Related manuals for EX-MR1

Brands by name

Popular brands

Casio EX-MR1, User Manual

Search results

Summary of Contents for EX-MR1

Reviews:

Related manuals for EX-MR1

Brands by name

Popular brands