Casio DT-X100 Series, Service Manual

Page: 59 / 82

— 56 —
5-7. WLAN communication
For DT-X100M10R/M10R-CN/M10R2/M10R2-CN/M30R/M30R-CN/M50R/M70R
5-7-1. Test Con fi guration
PC Access Point
LAN CABLE
Wireless
Transmission
5-7-2. Format of Con fi guration File
Create a con fi guration fi le that matches the test environment.
This section describes the format.
If the fi le has already been created, proceed to Section 5-7-3.
1. wlancfg1.ini ~ wlancfg8.ini
Designate the Access Point SS_ID and the DT-X100 IP address.
These
fi les are included in the DT-X100 folders shown below.
\FlashDisk\DIAG\WLAN
[WLAN]
WLANPOWER=1
POWERSAVE=1
WLANCFG=1
BancCon
fi g=1
RoamingRSSILever=-78
RoamingAvailableTime=60
RoamingRSSISpan=1
[STATIC]
SSID=PY-055_SS_test
ADHOC=0
Access Point SS_ID
[TCPIP]
DHCP=0
IPADDRESS=132.1.70.30
SUBNETMASK=255.255.255.0
DEFAULTGATEWAY=
DNS1=
DNS2=
WINS1=
WINS2=
IP Address assigned to DT-X100
Follow the above steps to create up to wlancfg8.(Do not use an overlapping IP address)
2. FLCE (Shot Cut)
Designate the IP address of the PC used for transmission.
This
fi le is included in the DT-X100 folders shown below.
\FlashDisk\DIAG\WLAN
51#"\FlashDisk\DIAG\WLAN\FLCE.exe" /y={lan,132.1.70.41,}
IP Address for the PC