Casio DT-X100 Series, Service Manual

Page: 34 / 82

— 31 —
4-2. LCD-MODULE
(1) Remove the MAIN-UNIT-VA4. (Refer to 4-1.)
(2) Remove the LCD-MODULE block from the CASE/INNER by pushing it with your fi nger from the back.
CASE/INNER
(3) Remove the LCD MODULE from the RUBBER/LCD.
LCD MODULE RUBBER/LCD
(4) Remove the SPRING (2 places).
SPRING
(5) Assemble the removed parts by reversing the disassembly procedure.
* Attach the TAPE/LCD to the LCD MODULE referring to the picture below.
LCD MODULE
TAPE/LCD
Attach also to the back side.
Reference position for attaching:
Align with the edge of LCD plate.