Case 1021F, Operator'S Manual

Page: 97 / 366

3 - CONTROLS AND INSTRUMENTS
EXTERIOR CONTROLS
Hood switch and master disconnect [60630030]
WARNING
Automatic closure!
Keep your hands and body and all personnel clear of the machine hood as it closes.
Failure to comply could result in death or serious injury.
W0048A
Hood Switch
The hood switch is located on the left side of the machine.
The hood, left, and right side engine covers allow access
to both engine sides, air cleaner and coolers. A locking
mechanism is provided for the hood switch cover. Use
the machine key to open and close this cover.
1. Insert the key. Make sure to completely insert the key
for proper operation.
NOTICE: Damage can occur to the key or locking
mechanism if key is improperly inserted and turned.
2. After releasing the lock, remove the key and open the
cover.
RCPH10WHL425AAH
1
3. The hood switch will automatically raise the hood on
the machine. Keep all tools, service equipment, and
personnel away from the hood when it is automatically
opening and closing.
RCPH10WHL106AAH
2
4. Push up on the switch to raise the hood. The switch
will remain in the up position for hands free opening.
To close the hood, push down on the switch. As a
built in safety measure, the down control must be held
in order to lower the hood.
RCPH10WHL106AAH
3
3-31