Case 1021F, Operator'S Manual

Page: 287 / 366

7 - MAINTENANCE
Cab service [60637103]
Inspecting and cleaning the machine
WARNING
Moving parts!
Install all covers, panels, and guards after servicing or cleaning the machine. Never operate the ma-
chine with covers, panels, or guards removed.
Failure to comply could result in death or serious injury.
W0135A
Maintenance specifications
Inspect and clean Periodically
Clean immediately if oil or grease has been spilled on the
machine. Clean with steam or a high pressure water jet.
Look for any leaks, and check the condition of all pipes and
hoses.
Take the opportunity during this operation to make a visual
check of all the welded components (in case of appearance
of cracks), the bucket/attachment linkages and check the
teeth and tooth tips for correct retention and for wear.
Cab headliner
The foam headliner in your cab decreases noise. To keep
the headliner in good operating condition, remove dust with
a vacuum cleaner.
NOTICE: DO NOT wash the headliner with water. Water
can cause damage to the headliner and lower the noise
control capacity of the headliner.
Operator's seat
WARNING
Chemical hazard!
Always wear protective clothing and goggles when cleaning with solvents, acids, or alkaline chemical
agents. Always follow the chemical manufacturer's instructions.
Failure to comply could result in death or serious injury.
W0180A
Remove dust and dirt from the seat with a vacuum cleaner
or soft brush. Clean stains with the correct use of a material
cleaner.
Before removing stains, try to find what type and how old
the stains are. Some stains can be removed with water or
soap solution.
Cleaning Fluid - This type of cleaner can be used for grease
or oil stains. Carefully remove the item that caused the
stain with a scraper or a dull knife.
Use a minimum amount of cleaner and a clean cloth. Move
the cloth from the outside of the stain towards the center.
When the stain is removed, use a clean cloth to dry the
area to prevent a cleaning fluid pattern.
7-95