Case 1021F, Operator'S Manual

Page: 128 / 366

3 - CONTROLS AND INSTRUMENTS
RCPH10WHL079FAH
3
6. Transmission enable switch
Use the transmission enable switch by pushing down on the top of the enable switch. The indicator
light on the bottom of the enable switch will illuminate when activated. By following the correct
sequence and enabling the auxiliary F-N-R the operator may select FORWARD-NEUTRAL-REVERSE
from the loader control lever or the auxiliary F-N-R switch. See Chapter 4 - Operating Instructions
for further information.
7. Auto shift switch
The auto shift switch is used to select the automatic or manual mode of operation for the transmission.
When the auto shift switch is in the ON position, the transmission will automatically shift up and down
between 1st or 2nd and the highest speed setting on the transmission lever.
8. Declutch switch (4-speed only)
Use the declutch pressure switch to adjust the clutch cut-off point. The switch controls the vehicle
tractive effort using the brake pedal, independent of engine speed. This feature can improve loader
applications when truck loading and tight corner operations are required.
8. Torque converter lock-up switch (5-speed only)
This switch allows a direct mechanical connection between the engine and the transmission to
eliminate torque converter loss. It allows the operator to remain locked up from second gear upward.
This allows for faster vehicle accelerations and speeds.
3-62