Case 1021F, Operator'S Manual

Page: 15 / 366

1 - GENERAL INFORMATION
Note to the owner [60621012]
This manual contains information concerning the adjustment and maintenance of your new equipment. You have
purchased a dependable machine, but only by proper care and operation can you expect to receive the performance
and long service built into this equipment. Please have all operators read this manual carefully and keep it available
for ready reference.
Your authorized dealer will instruct you in the general operation of your new equipment. Your dealer's staff of fac-
tory-trained service technicians will be glad to answer any questions that may arise regarding the operation of your
machine.
Your authorized dealer carries a complete line of genuine service parts. These parts are manufactured and care-
fully inspected to insure high quality and accurate fitting of any necessary replacement parts. Be prepared to give
your dealer the model and product identification number of your new equipment when ordering parts. Locate these
numbers now and record them below. Refer to the 'General Information' section of this manual for the location of the
model and product identification numbers of your machine.
PLEASE RECORD THE FOLLOWING INFORMATION
Model
Date Purchased
This is the safety alert symbol. It is used with and without signal words to alert you to potential
personal injury hazards. Obey all safety messages that follow this symbol to avoid possible
death or injury.
WARNING
Illustrations in this manual may show protective shielding open or removed to better illustrate a par-
ticular feature or adjustment.
Replace all shields before operating the machine.
Failure to comply could result in death or serious injury.
W0012A
IMPROVEMENTS
CNH America LLC is continually striving to improve its products. We reserve the right to make improvements or
changes when it becomes practical and possible to do so, without incurring any obligation to make changes or addi-
tions to the equipment sold previously.
1-9