3 - CONTROLS AND INSTRUMENTS
5. Height adjustment handle:
A. Automatic Adjustment - With the operator sitting
in the seat, lift the handle UP until the desired
height is reached. Release the weight adjustment
tab. Perform a "hop" movement, briefly removing
weight from the seat, then regain sitting position
and reapply weight. This will reset the height latch.
B. To lower the seat, push down and hold the weight
adjustment tab until the desired height is reached.
Release the weight adjustment tab and perform
the “hop” movement, briefly removing weight from
the seat, then regain sitting position and reapply
weight. This will reset the height latch.
NOTE:
If the "hop" movement is not performed, the
seat will return to its former latch point.
C. Manual Adjustment - The seat can be raised or
lowered by increasing or decreasing the air pres-
sure in the seat. Lift the handle UP to increase the
air pressure. Push the handle DOWN to decrease
the air pressure and lower the seat.
RCPH10WHL092BAL
9
6. Seat depth handle - Lift handle up and move the cush-
ion to the desired position. Release the handle to lock
the cushion in place.
7. Seat cushion angle adjustment handle- Lift up on the
handle. Move the seat to the desired angle. Release
the handle to lock the cushion angle.
Weight indicator, standard seat - The weight indicator
is located at the bottom of the seat. Use it to adjust to
the operator's weight for a more comfortable ride.
RCPH10WHL092BAL
10
8. Ride cushion adjustment lever - The seat suspension
can be adjusted to various operating conditions in or-
der to gain the most comfortable ride for the operator.
The cushion adjustment lever has four positions from
soft to hard in order to allow for maximum comfort over
varying or rough terrain.
The first adjustment is with the small end of the ad-
justment lever pointing toward the front of the seat, as
shown. The other three adjustments can be obtained
by rotating the small end of the adjustment lever out
away from the seat. Each of the adjustments has a
slight detent.
Weight Adjustment: Lift or press handle until the green
marking at the weight/height indicator is visible.
Height Adjustment: Lift or press handle until the re-
quired position is adjusted (The green marking is visi-
ble on the indicator at the bottom front of the seat).
RCPH10WHL424AAH
11
3-6
Summary of Contents for 1021F
