Cascade Sciences CVO-2-HT, Installation And Operation Manual

Page: 29 / 72

29 | P a g e
cascadesciences.com | Tel. 503 847-9047
INSTALLATION
Shelving Installation Continued
CVO-5-HT Shelving
To ensure accurate temperature measurement, one shelf bottom must be in close proximity to the
oven temperature probe. This probe extends out from the chamber back wall. Do not place the
shelf in direct contact with the probe.
1. Install the shelf clips in the slots of the shelf standard mounting rails located on the sides of
the chamber interior, 4 clips per shelf.
a. Squeeze each clip, insert the top tab first, and then the bottom tab using a
rocking motion.
2. Set the shelves on the clips.
a. Verify the shelves are level.
Rocking Motion
Probe
Shelf
Install 4 Shelf Clips
Place the Shelf