Cascade Sciences CVAC-9.3, Installation & Operation Manual

Page: 43 / 54

43 | P a g e
cascadesciences.com | Tel. 503 847-9047
OPERATION
Note: When putting the oven into operation in a new location, set the constant temperature set point
equal to your application or the highest temperature of your multi-step heating profile.
Note: An active profile overrides the constant temperature set point. The constant temperature set
point cannot be adjusted while a heating profile is active.
S
ET THE
C
ONSTANT
T
EMPERATURE
S
ET
P
OINT
The controller must be on its Home Page to set the constant temperature set point.
1. Use the Up and Down arrow keys to adjust the green constant temperature set point
on the second row to match your set point.
a. Release the Arrow key once you have reached your set point. There may be a
brief pause before the oven starts heating.
H
EATING
P
ROFILES
Please see the Programming Guide – EZ-Zone Heating Profiles document for instructions on how to
program automated heating recipe profiles. The guide comes included with the oven and provides
illustrated explanations for all major heating profile functions and programming steps.
The Watlow controller can hold 4 ten-step heating profiles. Additionally, profiles may be combined
by programming profile steps sequentially to run as a single profile of between 2 and 40 steps.
Natural chamber resting
temperature, a15°C
Constant Temperature Set
Point, initially set to 0°C
Constant Temperature
Set Point 150°C
Heating Indicator
Light “1”
Home Page
Home Page