Cascade Sciences CVAC-9.3, Installation & Operation Manual

Page: 48 / 54

48 | P a g e
cascadesciences.com | Tel. 503 847-9047
USER MAINTENANCE
Disinfecting
Disinfect the oven if algae, mold, bacteria, or other biological contaminants are an issue. For
maximum effectiveness, disinfection procedures are typically performed after cleaning. Keep the
following points in mind:
•
Turn off and disconnect the unit to safeguard against electrical hazards.
•
Disinfect the oven chamber using commercially available disinfectants that are non-
corrosive, non-abrasive, and suitable for use on stainless steel and glass surfaces. Contact
your local Site Safety Officer for detailed information on which disinfectants are compatible
with your applications.
•
If permitted by your protocol, remove all interior accessories (any shelving and other non-
attached items) from the chamber when disinfecting.
•
Disinfect all surfaces in the chamber, making sure to thoroughly disinfect the corners.
Exercise care to avoid damaging the sensor probes.
•
When disinfecting external surfaces, use disinfectants that will not damage painted metal,
glass, and plastic.
M
AINTAINING
A
TMOSPHERIC
I
NTEGRITY
Periodically, inspect the door latch, trim, catch, and gasket for signs of deterioration. Failure to
maintain the integrity of the door system shortens the lifespan of the unit.
E
LECTRICAL
C
OMPONENTS
Electrical components do not require maintenance. If the oven fails to operate as specified, please
contact your distributor or the manufacturer for assistance.
V
ACUUM
P
UMP
M
AINTENANCE
Refer to the operation manual supplied with your vacuum pump for recommended maintenance
routines such as oil levels, replacement of sorbent charge, and exhaust filter change outs.
Contact
your vacuum pump supplier if you do not have an operation manual.