CAS NT-500 Series, Owner'S Manual, Page: 12 / 66

13
■ or Key
Key Model Description
NT-501A
Manual tare entry. If the tare weight is previously known press
this key, and enter the tare weight by using the numeric keys,
and then press SET key register it.
(Used as MANUAL TARE key).
NT-502A
NT-505A
F13 - 0 : Used as STOP key in packer mode.
F13 - 1 : Manual tare entry.
If the tare weight is previously known press this key,
and enter the tare weight by using the numeric keys, and then
press SET key register it.
(Used as MANUAL TARE key).
■ Key
Use (1) : Press “ID” key and type the ID code by pressing the numeric keys and then
the ID code is registered. Range of the ID code is 0 to 50.
Use (2) : Clear set-point by pressing this key for 2 seconds.
■ Key
Use (1) : Used to clear erroneous entries.
Use (2) : Used to enter decimal point.
■ Key
Used to save current condition and exit in Calibration, Test, Set mode.
■
~
Key
Numeric Keys. Used to enter setting value, tare, ID code, etc.