CAS NT-500 Series, Owner'S Manual

Page: 29 / 66

30
Serial interface
F20 Baud rate 1200, 2400, 4800, 9600, 19200bps
F21 Parity bit 0 ~ 2 (non parity / even / odd)
F22 Transmission method 0 ~ 5
F23 Device number 00 ~ 99
F24 Data format 0 ~ 2 (22 byte / 10 byte / 18 byte)
Print
F30 Set printer 0 ~ 4
F31 Set pint format 7 kinds of print form
F32 Set manual / automatic print 0 / 1 (manual / automatic )
F33 Initialization of weighing number and
accumulated data
OFF / ON
F34 Input user's print message 0 ~ 71 character
F35 Line feed 1 ~ 9 line feed
External input/output
F40 Relay mode 0 ~ 4
F41 Timer - start delay of finish signal 0.0 ~ 9.9 (0.0sec ~ 9.9sec)
F42 Timer - end delay of finish signal 0.0 ~ 9.9 (0.0sec ~ 9.9sec)
F43 Range of zero relay 00 ~ 99 digit
F44 External input 0 ~ 6
Option
F60 Option selection 0 ~ 2 (none / BCD output / Analog output)
F61 Output current at zero 00000 ~ 24000 (00.000mA ~ 24.000mA)
F62 Output current at maximum capacity
of the scale
00000 ~ 24000 (00.000mA ~ 24.000mA)
F63 Analog output data 0 / 1 (Net / Gross)
F64 Maximum output of Analog. 0 ~ 99999
F65 Logic of BCD output 0 ~ 2 (22 byte / 10 byte / 18 byte)
* Note : In case of NT-501A, F13, F40~F43 are not available.