CAS CU series, Owner'S Manual

Page: 70 / 127

71
13.6 Taring/Printing at Stability
Determine if the balance should wait for stability before printing when the
[PRINT]
key
is pressed or zeroing when the
[O/T]
key is pressed.
To print or tare without waiting for stability:
(Immediately operating mode)
Select menu item
39
.
To have printing or taring take place after stability is detected:
(Waiting for stability
detection)
Select menu item
40
.
x
While the balance is waiting for stabilization, ---- is displayed.
x
When the
[O/T]
key has been pressed,
“
---” is displayed. At this occasion, press the
[POWER]
key if you desire
to disable this function and abort taring.
x
When the
[PRINT]
key has been pressed,
Once the communication symbol and the Stand-by symbol are lit, then stability
detection is waited. The data will be output after stability is detected. If the
[POWER]
key is pressed during the waiting, the balance is brought to stand-by. The data will be
printed upon stability in the next weighing.
x
See 13.5 for details of Zero Range.
x
See 11.3 for details of stability detection.