Carson Climb Warrior 3.0, Instruction Manual

Page: 11 / 44

11 //
GB
CHASSIS
REMOVING THE BODY
• Remove hook pin • To remove the body - swing to open
Front shock unit
Rear shock unit
Rear tyre
Battery pack
Front tyre
Motor
Speed Controller
TRANSMITTER SETTINGS
WARNING: SPEED CONTROLLER ALREADY PROGRAMMED IN THE FACTORY.
Important note! For some RC systems, it is possible to select the “TH TYPE” (gas distribution) in advance. (for example, 70:30 - 50:50 - 1:100%) To ensure 100% throttle function, it is absolutely
necessary to set the “TH TYPE” (gas distribution) to the value “50:50”!! Switch off the speed controller and switch on the transmitter. Set all values of your transmitter to „100%“. We strongly
recommend activating the failsave function.
Battery type selection sound with
“Beep”
• Short one beep , Nimh battery
• short two beep, 2s Lipo
• short three beep, 3s Lipo
• Long one beep, Normal operation
LED indication when operation
• LED off when throttle trigger at neutral
position
• LED flash when throttle is not at full speed
• LED solid on when throttle is at full speed
Transmitter trigger and ESC power switch position
ESC power Switch Trigger neutral point