Carson Climb Warrior 3.0, Instruction Manual

Page: 12 / 44

GB
// 12
1 To remove the body - swing to open.
2
Insert the battery.
3 Fix it with the mounting brackets.
Advice
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Regular examination of transformer or battery charger for any damage to their cord, plug,
enclosure and other parts.
INSERTING THE DRIVE BATTERY
CHARGE BATTERY PACK
Driving mode and battery mode are set via a jumper: Jumper settings:
Model selection:
„F / B / R“ forward- brake-backward
„Boat“ forwards -backwards (without brake)
„Crawler mode“ forward-backward (handbrake)
Factory setting:
Battery: LiPo
Driving mode: „F / B / R“ forwards-braking-backwards
Protective functions
1. Battery protection:
controller detects undervoltage in the battery.
Level 1: Controller limits the power
Stage 2: controller switches off
2. Temperature protection:
Speed controller temperature higher than 100 ° C
• Engine output is reduced to prevent the vehicle from suddenly stopping. „LEDs are flashing“
Speed controller temperature less than 80 ° C
• Motor output is normalized again
Mode
Batt
F/B/R
F/B
BOAT
Lipo NiMH
green red
LED green LED red
Technical data:
Input: 5V / 2A
Output: 7.4 V / 1000mA
Automatic power off: Yes
Plug: XHP
Compatible rechargeable
batteries: Lithium