CarShow
Installation Guide
CarShow
Copyright 2012 All Rights Reserved
Installation Guide
CS-FD1034
Page 9
Mount the GPS antenna in a location on
the exterior of the Vehicle
Route the GPS harness away from other power harnesses in
the vehicle.
This will help to ensure optimum performance of the GPS
system.
Backup Camera Installation
The following steps will instruct you how to install included backup camera
STEP
5
OEM Lift Gate Handle
T
Tailgate Cutout Template
Use template on page 20 to attach to lift gate handle as
shown at right
T
Remove Lift Gate Panel
Remove inner lift gate panel using T30 torx bit.
**Check inside of lift gate PRIOR to drilling mounting
hole for camera**
T
Mark Drilling Location
Mark lift gate for drilling location using pick tool or flat
blade screw driver
