CarShow
Installation Guide
CarShow
Copyright 2012 All Rights Reserved
Installation Guide
CS-FD1034
Page 14
INSTALL THE CAR SHOW NAVIGATION SYSTEM
You will need to prepare the Car Show Navigation System for installation in the vehicle.
STEP
7
Connect GPS Antenna
The GPS Harness must be tightened with a WRENCH to
ensure it is properly seated.
Failure to follow this step may result in poor GPS signal
See the Harness Diagrams for more information
Prepare the Vehicle side harnesses for
connection to the Car Show Harness
Use care not to pinch or damage cables as this will cause
performance issues/failures
CAUTION
Connect Car Show Harness
Connect Car Show “T” harness to OEM harnesses.
Use care not to pinch or damage cables as this will cause
performance issues/failures
Connect OEM Radio Chassis
Connect OEM Radio chassis to Car Show “T” harness.
Be sure to connect AM/FM & Satellite Radio antennas.
Use care not to pinch or damage cables as this will
cause performance issues/failures
Connect the Power Harnesses
Be sure harness has secure connection to ensure proper
performance
CAUTION
CAUTION
CAUTION
