CarShow
Installation Guide
CarShow
Copyright 2012 All Rights Reserved
Installation Guide
CS-FD1034
Page 16
Mount OEM SYNC Display
Adhere included Velcro to bottom of OEM SYNC display
Prepare OEM SYNC Module
Adhere other included piece of Velcro to OEM SYNC
module
Re-install OEM SYNC Display
Connect OEM SYNC Display to OEM harness and Velcro
SYNC Display to SYNC Module
NOTE: Be sure the harness is connected properly as
SYNC system will not function properly unless
connected.
OEM SYNC Display
OEM SYNC Display shown at right mounted to OEM
SYNC Module via Velcro
RE-INSTALL THE TRIM COMPONENTS
You will need to reinstall all trim components that were removed in step 2
STEP
8
Re-Install Dash Trim
Carefully re-install right hand side dash trim and be sure
to replace the 7mm bolt that was removed in step 2.
CAUTION
