CarShow
Installation Guide
CarShow
Copyright 2012 All Rights Reserved
Installation Guide
CS-FD1034
Page 10
T
Drill Camera Mounting Hole
Drill 3/8” mounting hole in lift gate handle
T
Attach Camera Adhesive
Attach foam camera adhesive to back of camera
T
Insert Camera Into Lift Gate
Carefully insert camera into lift gate and be sure camera
is aligned properly
Align Camera
Once camera is aligned properly, apply pressure so that
adhesive adheres properly to tailgate handle
Install Mounting Hardware
Put included locking washer and nut onto camera cable
as shown at right
Tighten Mounting Hardware
Use 9/16 open end wrench to tighten
Connect Cables
Connect cables and be sure to put electrical tape on
connections to ensure secure connection
CAUTION
