Carrol Touch TouchSystems CarrollTouch Prog, Programmer'S Manual

Page: 106 / 274

CARROLL TOUCH Chapter 7 - CTKERN
Touch System Programmer’s Guide 7-19
Figure 7-12. Calibration Manual Edit Menu Screen
Exit
After you complete all desired calibrations and press the E
SC
key from
the main menu screen to exit CALIB, you are prompted to save the
calibration data to the specified calibration data file and/or the installed
CTKERN driver, as shown in Figure 7-13. If you attempt to exit
without specifying a default calibration, or if multiple default
calibrations are specified, a message appears and you are given the
option of either returning to the Main Menu or exiting CALIB without
saving any calibration data.
Figure 7-13. Calibration Exit Prompt Screen
CTKERN Calibration V1.0
Table BiosVideo ---------Flags-------- --Scaling-- --------Calib Params--------
Index Mode (hex) Default Graphics/Text Xres Yres Xoff Yoff Xspan Yspan
0 03 Yes Text 080 025 05 05 64 48
Main Menu
-> <- = Select parameters to Edit
Spacebar = Toggle Non-Numeric Parameters
Enter = Save changes and Exit to Main Menu
ESC= Discard changes and Exit to Main Menu
Save the calibration data to CALIB.DAT? (Y/N)
Update the calibration data in the
installed CTKERN driver at software
interrupt 56H? (Y/N)