![Carrier CT2-29-TV Workshop Manual Download Page 6](http://html1.mh-extra.com/html/carrier/ct2-29-tv/ct2-29-tv_workshop-manual_2562588006.webp)
i
62-11161
SAFETY
SAFETY PRECAUTIONS
Your Carrier Transicold unit has been designed with the safety of the operator in mind. During normal operation, all
moving parts are fully enclosed to help prevent injury. During all pretrip inspections, daily inspections, and problem
troubleshooting, you may be exposed to moving parts. Please stay clear of all moving parts when the unit is in
operation and when the unit main power switch is in the START/RUN position.
Engine Coolant
The engine is equipped with a pressurized cooling system. Under normal operating conditions, the coolant in the
engine and radiator is under high pressure and is very hot. Contact with hot coolant can cause severe burns. Do not
remove the cap from a hot radiator. If the cap must be removed, do so very slowly in order to release the pressure
without spray.
Battery
This unit is equipped with a leadacid type battery. The battery normally vents small amounts of flammable hydrogen
gas. Do not smoke when checking the battery. A battery explosion can cause serious physical harm and/or blindness.
SPECIFIC WARNING AND CAUTION STATEMENTS
To help identify the label hazards on the unit and explain the level of awareness each one carries, an explanation is
given with the appropriate consequences:
DANGER
DANGER -- warns against an immediate hazard which WILL result in severe personal injury or death.
WARNING
WARNING -- warns against hazards or unsafe conditions which COULD result in severe personal in-
jury or death.
CAUTION
CAUTION -- warns against potential hazard or unsafe practice which could result in minor personal
injury, or product or property damage.
NOTE
NOTE --
gives helpful information that may help and avoid equipment and property damage.
The statements listed on the next page are specifically applicable to this unit and appear elsewhere in this manual.
These recommended precautions must be understood and applied during operation and maintenance of the equip-
ment covered herein.