2--35
62--11161
2.3.4 Crankshaft (Continued)
2.3.4.g Crankshaft Sleeve Wear
1. Check the wear on the crankshaft sleeve (1).
2. If the wear exceeds the allowable limit or if the engine
oil leaks, replace the crankshaft sleeve (1).
Sleeve Wear
Allowable
Limit
0.1 mm
0.004 in.
2.3.4.h Replacing Crankshaft Sleeve
1. Remove the crankshaft sleeve using a special--use
puller set.
2. Set the sleeve guide (4) to the crankshaft (2).
3. Heat the new sleeve to a temperature between 150 to
200
°
C (302 to 392
°
F), and fix the sleeve on the crank-
shaft (2) as shown in the figure.
4. Press fit the sleeve using the auxiliary socket for
pushing (3).
NOTE
Install the sleeve with the largest chamfered
surface facing outward.
1. Crankshaft Sleeve
2. Crankshaft
3. Auxiliary Socket For
Pushing
4. Sleeve Guide
