2--12
62--11161
2.2.6 Timing Gear, Camshaft and Fuel Camshaft (Continued)
2.2.6.g Fuel Camshaft
1. Remove the retaining plate (1).
2. Remove the fork lever holder mounting bolts (8), then
draw out the injection pump gear (3) and fuel cam-
shaft (2) with the governor fork assembly.
When Reassembling
Hook the governor spring (7) to the fork lever 2 (6) as
shown in the figure before installing the fork lever
assembly to the crankcase.
1. Retaining Plate
2. Fuel Camshaft
3. Injection Pump Gear
4. Governor Sleeve
5. Fork Lever 1
6. Fork Lever 2
7. Governor Spring
8. Fork Lever Holder Mounting
Bolt
2.2.6.h Oil Pump and Crankshaft Gears
1. Remove the oil pump gear (6).
2. Remove the oil pump mounting bolts, then the oil
pump (5).
3. Remove the collar (4), O--ring (3) and crankshaft oil
slinger (2).
4. Remove the crankshaft gear (1) with a puller.
When Reassembling
Begin reassembly by installing the crankshaft gear first.
Install the collar (4) after aligning the marks on the gear.
(See 2.2.6.e)
Replace the oil pump.
Tightening
Torque
Oil Pump
Mounting Bolt
17.7 to 21.6 N
.
m
1.8 to 2.2 kgf
.
m
13.0 to 15.9 ft--lbs
1. Crankshaft Gear
2. Crankshaft Oil Slinger
3. O--ring
4. Crankshaft Collar
5. Oil Pump
6. Oil Pump Gear
