![background image](http://html1.mh-extra.com/html/carrier/50gj006/50gj006_installation-start-up-and-service-instructions-manual_2561559007.webp)
UNIT
50GJ
STD UNIT
WEIGHT
VARISLIDE™
ECONOMIZER
WEIGHT
CORNER
WEIGHT (A)
CORNER
WEIGHT (B)
CORNER
WEIGHT (C)
CORNER
WEIGHT (D)
Lb
Kg
Lb
Kg
Lb
Kg
Lb
Kg
Lb
Kg
Lb
Kg
006
465
211
34
15.4
133
60.3
113
51.3
101
45.8
118
53.5
CONNECTION SIZES
A
1
3
⁄
8
9
Dia. [35] Field Power Supply Hole
B
2
9
Dia. [51] Power Supply Knock-Out
C
1
9
Dia. [44] Charging Port Hole
D
7
⁄
8
9
Dia. [22] Field Control Wiring Hole
E
3
⁄
4
9
-14 NPT Condensate Drain
F
2
1
⁄
2
9
Dia. [64] Power Supply Knock-Out
NOTES:
1. Dimensions in [
] are in millimeters.
2.
Center of Gravity.
3.
Direction of airflow.
4. Ductwork to be attached to accessory roof curb only.
5. Minimum clearance (local codes or jurisdiction may prevail):
a. Bottom to combustible surfaces (when not using curb) 0 in., on
horizontal discharge units with electric heat 1 in. clearance to duct-
work for 1 ft.
b. Condenser coil, for proper airflow, 36 in. one side, 12 in. the other.
The side getting the greater clearance is optional.
c. Overhead, 60 in. to assure proper condenser fan operation.
d. Between units, control box side, 42 in. per NEC (National Elec-
trical Code).
e. Between unit and ungrounded surfaces, control box side, 36 in.
per NEC.
f. Between unit and block or concrete walls and other grounded
surfaces, control box side, 42 in. per NEC.
g. Horizontal supply and return end, 0 inches.
6. With the exception of the clearance as stated in Notes 5a, b, and c,
a removable fence or barricade requires no clearance.
7. Units may be installed on combustible floors made from wood or
Class A, B, or C roof covering material.
8. The vertical center of gravity is 1
8
-6
1
⁄
2
9
[470] up from the bottom of
the base rail.
Fig. 6A — Base Unit Dimensions — 50GJ006
7