SAFETY
Installing, starting up
and
servicing air conditioning
equipment can be hazardous due to system pressures,
electrical components and equipment location (roofs,
elevated structures, etc).
Only trained, qualified installers and service mechanics
should install, start-up and service this equipment
Untrained personnel can perform basic maintenance
functions such as cleaning coils. All other operations
should be performed by trained service personnel.
When working on the equipment, observe precautions
in
the literature and on tags, stickers and labels attached
the equipment.
Follow all safety codes.
Wear safety glasses and work gloves.
Keep quenching cloth and fire extinguisher nearby
when brazing.
Use care in handling,
equipment.
rigging and setting
See Table I for Physical Data.
ELECTRIC SHOCK HAZARD
Open all remote
before
servicing this equipment.
Rigging
Preferred method is with spreader bars from
above the unit. Use
mm)
pipe or hooks in
lifting holes. Rig with 4 cables and spreader bars.
panels must be in place when rigging. See rigging label
on unit for details concerning shipping weights, distance
between
holes, center of gravity and spreader bar
dimensions. See Fig. 2.
If overhead rigging is not possible,
chiller on skid
or pad for rolling or dragging. When rolling, use mini-
mum 3 rollers. When dragging, pull the pad. Do not
force
When in final position, raise from above
to lift unit off pad.
All panels must be in
units if no skid is
lace when rigging. Do not fork
sides only.
If unit has
truck from
r
NOTCHES
I N E N D O R S P R E A D E R S
CENTER
Fig. 2
Wigging with Spreader Bars
(Field Supplied)
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Catalog No.
Printed U.S.A.
Form
P g
Replaces: New
