25
NGA 6000 has the power-saving software in it. It operates in a measurement mode and then turns
into a standby mode after 10 minutes as the pump automatically switches itself OFF.
It is also programmed to operate in a purge mode for just 10 minutes and turns to be in a standby
mode automatically.
In this manner, in short term NGA 6000 will elongate life cycle of a filter exchange period and in long
term, will elongate the life cycle of pump and other parts as well.
Note
It is recommended against the measurement of the exhaust gas in a highly
humid weather such as a rainy day. If it is unavoidable, reuse the filter attached
to the probe handle with the air blow. In addition, perform visible verification of
the main filter and the dust filter attached to the rear of NGA 6000 whether they
have a lot of moisture accumulated, and exchange them with new ones, if
possible.
