Carlton SP8018 TRX, Owner'S Manual, Page: 69 / 101

SP8018 TRX SERVICE ACTUATOR/CLUTCH
49
•
Loosen the jam nut on the ball joint next
to the clutch arm.
•
Turn the lug nut away from the clutch to
increase the clutch arm travel when
disengaging the clutch. Only make
small adjustments.
•
Retighten the jam nut.
•
Push and hold the belt switch down to
disengage the clutch. Pay close attention
to how far the actuator pushes the clutch
arm and stop if the arm comes close to
the clutch housing. NEVER START
THE ENGINE WITH THE CLUTCH
ENGAGED.
If the actuator does not work when the belt switch is pushed up or down, there could be a number
of problems (such as, faulty switch, broken wire, bad actuator, etc.). Contact your dealer or J. P.
Carlton for more information or service.
CLUTCH LUBRICATION
•
Clutch should be given 1-2 shots of
grease every 100 hours of operation.
Use only Texaco Starplex II grease. Do
not over grease.
LOOSEN JAM NUT
LUG NUT
CLUTCH ARM