Carlton SP8018 TRX, Owner'S Manual, Page: 33 / 101

SP8018 TRX MACHINE CONTROLS
13
HYDRAULIC CONTROLS
•
A series of hydraulic controls are located
on the machine and radio transmitter,
which are clearly marked for use. There
are five operating and positioning
functions on the machine and radio
transmitter, the machine detail is shown
below. To operate push the toggle
switch in the direction of the command
you want to perform, such as Right
Track Reverse push the switch up.
•
The machine also has four other
hydraulic controls to adjust the speed
and precision of these five functions;
two of which are also on the radio
transmitter. These controls are detailed
later in this section.
RIGHT TRACK and LEFT
TRACK
•
Use both controls in the same direction
(Fwd/Fwd or Rev/Rev) to move machine
forward or reverse. The radio
transmitter has a switch (BOTH
TRACKS) that will move both tracks at
the same time in the forward or reverse
directions.
•
Use controls opposite (Rev/Fwd or
Fwd/Rev) of each other to turn machine
either right or left. When rotating the
machine, try not to leave one track
stationary while rotating the other one
around it as this could cause the machine
to jump a track. If it is desired to spin
the machine, counter-rotate the tracks.