P a g e |
7
2.2.1 Installation
During the initial installation of the FiX1 by trained staff, the unit is secured in position above the stockpiles to be
scanned. The FiX1’s position should give the clearest possible view of the area of interest.
Once installed, the FiX1 is surveyed in place on the site’s local coordinate system. This ensures that all data
collected by the FiX1 is correctly georeferenced.
A base surface, geo-referenced on the same coordinate system as the FiX1 and representing the floor level beneath
the stockpile, is uploaded into the FiX1. This acts as a reference for all volumetric calculations.
Figure 1 Fix1 installation surveyed into the local coordinate system
Figure 2 The base surface file defines the floor level on the local coordinate system
Summary of Contents for FiX1
Page 2: ......
