P a g e |
57
•
Volume (Net): equal to the fill volume minus the cut volume.
•
Density
•
Weight
•
Tonnage
9.2.3 Delete
Click
Delete
to delete the selected scan. The process takes a few seconds, during which a message appears:
Deleting scan
.
The scan is permanently removed from the FiX1 and from the
Scan list
.
9.2.4 Reprocess
When any scan is run, the resulting point cloud, gridded surface and volume are created with reference to the
parameters in the
Settings
>
Calculation
page (see section 7.5).
In some situations, you may wish to recompute the volume using different parameters, for example a different base
surface or a different angle of repose.
In this case, first change the appropriate settings in the
Calculation
page. Then, from the
Scan list
, select a scan
and click
Reprocess
.
The
Next Scan
frame will change to
Active
, replicating the processes displayed during a standard scan. When the
reprocessing is complete, the reprocessed scan appears in the
Scan list
above the original scan. It is displayed
with the same scan ID but is differentiated with an asterisk.
You can view, download or delete the reprocessed scan as with any normal scan. However, the reprocessed scan
cannot itself be reprocessed. Return to the original scan if further reprocessing is required.
9.3 Scan graph
The
Scan graph
shows, in graphical form, the computed volumes of the most recent scans completed on the FiX1.
Summary of Contents for FiX1
Page 2: ......
