Carlson FiX1 Installation Manual Download

Page: 16 / 88

P a g e |

3.1.3 FiX1 base

The blue metal base of the FiX1 incorporates all connectors.

The main power connector accepts the supplied power cable. The power must originate from a stable 90-240 V ac

mains supply.

Above the power connector is the fuse cover. Unscrew the fuse cover to access the cartridge fuse. The rating of

the fuse is T3.15AH250V.

On the adjacent side of the FiX1 base are arranged:

•

The serial connector: available for external accessories to connect with the FiX1.

•

The USB connector: available for external accessories to connect with the FiX1.

•

The Ethernet connector: allows a wired network connection using a standard Ethernet cable with an RJ45

connector.

On the side of the base opposite the power connector are arranged:

•

Wi-Fi antenna connection: an SMA coaxial RF connector to fit the supplied Wi-Fi antenna.

•

Cell antenna connection: an SMA coaxial RF connector to fit the supplied cell antenna.

•

A protective cover for the SD card / SIM card port: this can be unscrewed for access, if required.

All connectors on the FiX1 base are environmentally protected to a rating of IP67.

The serial number sticker is also located on the FiX1 base, next to the fuse cover. Quote the serial number during

any contact you have with Carlson concerning your FiX1 unit.

Figure 15 FiX1 base connections - i

Fuse cover

Power connector

with cable

attached

Ethernet

connector with

cable attached

USB connector

Serial connector

Serial number

sticker

FiX1 base

Summary of Contents for FiX1

























































































Search results

Summary of Contents for FiX1

Reviews:

Related manuals for FiX1

Brands by name

Popular brands

Carlson FiX1, Installation Manual

Search results

Summary of Contents for FiX1

Reviews:

Related manuals for FiX1

Brands by name

Popular brands