CARLO GAVAZZI VMU-C EM, Instruction Manual

Page: 43 / 126

VMU-C
VMU-C Instruction manual 43
Note : during update and restart, web pages can show error messages as VMU-C cannot
be temporarily reached.
Wait for a few seconds before restoring connection.
3.1.12.2 DATE,TIME AND VMU-M CONFIGURATION
By pressing the “
Set
” button you can set the VMU-C internal date and time on all the
VMU-M devices connected to VMU-C. If you
select the “Synchronise with …” function the
date and time sent to the VMU-C and as a consequence to the VMU-M devices
connected to it will be those of the PC in use .
3.1.12.3 RESETTING SYSTEM DATA
VMU-C provides 5 different Reset commands :
1) Yield data reset: it will reset all the production data stored in the internal
memory of VMU-C and in the VMU-M devices connected to it (if a memory
card has been installed in VMU-C, it is not affected by the Reset command).
2) Events reset: it will reset all the events stored in VMU-C and in the VMU-M
devices connected to it (if a memory card has been installed in VMU-C, it is
not affected by the Reset command).
3) Eos-Array, environmental sensor and meter reset: it will reset all the
environmental sensor data recorded in VMU-C and in the VMU-M devices
connected to it (temperatures, radiance and wind speed), as well as the
values of the plant kWh meters (if a memory card has been installed in VMU-
C, it is not affected by the Reset command).
4) Yield data and plant settings reset: It combines the three Reset commands
described above; it also resets the plant configuration (it doesn't reset the
data concerning the IP address, the SMTP mail server data and all the
previously input e-mail addresses).