VMU-C
VMU-C Instruction manual
38
3.1.11 UPDATING THE VMU-C FIRMWARE
Clicking on the “FIRMWARE” item will grant access to the page shown below.
Firmware update
This page is split in 2 areas relevant to 2 ways of updating the VMU-C:
a) Manual update
b) Automatic update
3.1.11.1
MANUAL UPDATE
Manual update allows to upgrade the current firmware release by uploading and
installing a new firmware package file (provided by Carlo Gavazzi organization) by
means of a PC. Pressing the “Browse” button will open a window allowing to specify
where the firmware update file has been saved; as soon as you select the file, VMU-C
will display the above window again, replacing the “Browse” caption with “OK” (the
update file must be obtained from the Carlo Gavazzi technical support. Pressing the
“Load” button will open a window prompting user to confirm the firmware update
operation. As soon as the update operation is confirmed, the system will prompt you to
confirm the operation under way.
FIRMWARE update confirmation
As soon as user gives OK to proceed with the firmware update operation the system will
display the screen shown below:
Summary of Contents for VMU-C EM
