CARLO GAVAZZI VMU-C EM, Instruction Manual

Page: 67 / 126

VMU-C
VMU-C Instruction manual 67
3.7 SENDING THE SYSTEM
CONFIGURATION
Once system configuration is completed, the system will display the relevant screen (Fig.
64): all data can be loaded into the MASTER VMU-C EM module. Only after the user has
issued the “Send plant data” command shall the data be operational.
Configuration has been completed and is ready to be sent to VMU-C EM
While the configuration transfer is under way, the system will display the screen shown
below:
The configuration is being loaded into VMU-C EM
Once data transfer is completed the system will display a confirmation message.
After having acknowledged by pushing the OK button, the user will be re-addressed to
the Home Page