CP3 version 3003
58
-
‘Drawings’ adds drawings and designs the carpark structures.
Optional. In the drawings menu, the installer can build up the entire structure of the carpark installation.
Drawings can be imported and icons can show the status of each space, such as available, occupied,
disabled, VIP etc. Physical displays with steady or moving arrows can be assigned and configured, and
emulated displays can be configured to show a specific status, such as the number of occupied spaces or
VIP spaces in one floor or the entire system.
-
‘Layout’. Option for personal screen view. E.g. Status page and alarm page as the preferred screen
view.
This menu is optional but can be used to personalise each user’s screen layout. Show the menus as cascade
or in layers. Decide which menus shall be in focus etc.
-
‘Alarms’. See historical alarms and acknowledge alarms. It is also possible to set different alarm set
points for groups or individual carpark spaces.
Optional.Useful if, for example, you want to set the alarm if predefined parking times are exceeded.
-
‘Status’. A view of the entire system shown as bar graphs or as a table.
Optional, but provides the operator with useful information of the occupancy on each floor or the entire
system
-
‘Reports’. For occupancy and space statistics.
Optional, but useful for historical investigations of space and area statistics, such as occupancy, available
spaces and most used/unused spaces, either as a graph or as a table.
-
‘Commands’. For example, the sequence setup to control a gate when the carpark is occupied.
Optional but useful to control a gate for example when a floor (or the entire system) is occupied.