CP3 version 3003
28
Sensors
Each parking space belonging to a lane/line needs a sensor to detect the presence of a car. Each sensor
must be connected to the 3-wire carpark bus, assigned by the SBP2WEB24 configuration tool, to be able to
transmit the sensor status (occupied/not occupied/disabled/VIP/etc.). For best performance it is
recommended to mount the 45-degree sensor in height of 2.5 m at the entrance of the parking space. The
built in LEDs will clearly indicate to the drivers if the parking space is available or not.
Other sensor/LED
indicator solutions are available and are further described under ‘General Installation – Selection of sensor
type’.
Display and Display Interfaces
The display interface is a small compact module with two purposes. Converting Dupline® to Modbus and
identifying the display by the SIN number. A display interface is needed for each display.
The display shows the number of available carpark spaces and or the direction. The display can be mounted
anywhere on the Dupline® bus and be programmed to show the number of available spaces the installer
decides. Totally, lane by lane, disabled, VIP or a combination of the different options together.
Combining Lanes to a Complete System
When the lanes are defined, we use the SBP2WEB24 controller and the SBP2CPY24 carpark server to
combine and upscale the carpark system from 100 to 1000 or even 10.000 spaces.
Each SBP2WEB24 can operate with maximum seven SBP2MCG324s. That is 7*90=630 spaces in total. By
using the Carpark server SBP2CPY24, we can operate with ten SBP2WEB24s, so we have 10*630 sensors
which means 6300 spaces in total. If additional spaces are needed, please contact Carlo Gavazzi for further
information.