CP3 version 3003
55
o
Response from sensors: The selected sensors will start flashing yellow for 5 sec. After 5
sec., they will start flashing green for 3 sec. After the 3 sec., the sensors will turn steady
green
Note: If there are many sensors to calibrate, it is possible to select sensor type and distance for multiple
sensors in the below menu named “Multiediting”.
Select sensor (or sensors) to be calibrated (See section “Automatic calibration”)
Select the menu “Multiediting”
Select “Mounting” and “Distance” for the selected sensors and then “Apply”
Select “Write settings” to enter the data of the selected sensor or sensors (See section “Automatic
calibration”)
When “Multiediting” is completed, the next step is to calibrate the sensor or sensors. (Same procedure as
under section “Automatic calibration”)
Select sensor or sensors to be calibrated
Press “Start calibration” under
Automatic mode
o
Response from sensors: The selected sensors will start flashing yellow for 5 sec. After 5
sec., they will start flashing green for 3 sec. After the 3 sec., the sensors will turn steady
green