CP3 version 3003
51
When the sensors have been dragged from the list on the left side to the specific line on the right side (see
picture above), the installer must manually place the sensors in consecutive order by positioning them
internally relative to one another. This can be done by clicking on each sensor icon and enter the Lane,
Line, Position number manually.
Option two:
Define the lines as the above picture shows and then select the ‘Multi line Addressing’ mode in the toolbar
on the right side.
This enables the manual sensor assign mode and opens the window below. Using this option, the installer
just needs to select the “Number of modules” in each line and then manually assign each sensor by
pressing the local button on the sensors in consecutive order. See the guide below.