Carl Valentin Spectra II, Service Manual

Page: 29 / 76

Spectra II Replacing Components
09.16 Serviceanleitung 29
5.10 Replacing the WLAN Module
M
F
H
G
G
H
J
K
F
I
E
L
D C B A
Figure 12
1. Unplug the printer from the electrical outlet.
2. Screw off the left printer cover.
3. Remove hot melt glue from WLAN module (K) and then remove
antenna cable (A) from WLAN module (K).
4. Remove connecting cable (E) from WLAN adapter (I).
5. Loosen screws (G) and washers (H) and dismount the WLAN
adapter (I).
6. Dismount screws (L), spacer rings (J) and hex nuts (F) and
remove WLAN module (K) from WLAN adapter (I).
1. Insert the new WLAN module (K) to the WLAN adapter (I) and fix
it with screws (L), spacer rings (J) and hex nuts (F) at the WLAN
adapter (I).
2. Mount the WLAN adapter (I) with screws (G) and washers (H) at
support bracket (B).
3. Insert connection cable (E) in the WLAN adapter (K).
4. Connect antenna cable (A) with WLAN module (K) and fix the plug
connectors with a drop of hot melt glue.
5. Install the left printer cover.
Removing the
WLAN module
Installing the
WLAN module