Carl Valentin Spectra II, Service Manual

Page: 49 / 76

Spectra II Refitting options
09.16 Serviceanleitung 49
7.3 Dispensing unit
A
C
B
C
D
E
Figure 28
1. Remove tear off edge (if mounted) at the front of printer.
2. For an easier handling, remove front plate (if mounted) which is
fixed at the printer base.
3. Pull the knurled knob (A) to open the dispenser rocker.
4. Place the dispenser unit (B) before the pressure roller. Fix it with
Allen screws (C) at the aluminium profile below the pressure roller
5. Engage again the dispenser rocker.
1. Remove tear off edge (if mounted) at the front of printer.
2. For an easier handling, remove front plate (if mounted) which is
fixed at the printer base.
3. Pull the knurled knob (A) to open the dispenser rocker.
4. Place the dispensing unit (B) before the pressure roller. Introduce
the photocell cable (D) between the chassis and the left
supporting plate of the dispenser downwards.
5. Fix the dispensing unit with the hex. head screws (C) at the
aluminium profile beneath the pressure roller.
6. Engage again the dispenser rocker.
7. Insert the plug of photocell cable (D) into the female connector (E)
and fasten it.
Dispensing unit
without photocell
Dispensing unit
with photocell