CareFusion PulmoLife, Instructions For Use Manual

Page: 15 / 156

English 11
Guidance and Manufacturer’s Declaration – Electromagnetic Immunity
The Pulmolife is intended for use in the electromagnetic environment
specified below. The customer or the user of the Pulmolife should assure that
it is used in such an environment.
Immunity Test IEC 60601 test
level
Compliance
Level
Electromagneti
c Enviroment -
Guidance
Voltage dips,
short
interruptions and
voltage variations
on power supply
input lines
IEC61000-4-11
<5% UT
(>95 % dip in UT)
For 0.5 cycle
40% UT
(60 % dip in UT)
for 5 cycles
70 % UT
(30 % dip in UT)
for 25 cycles
<5% UT
(>95 % dip in UT)
For 5 s
Not Applicable
(Battery
Powered)
Mains power
quality should
be that of a
typical
commercial or
hospital
environment. If
the user of the
Pulmolife
requires
continued
operation during
power mains
interruptions, it
is recommended
that the
Pulmolife be
powered from
an
uninterruptable
power supply or
a battery.
Power frequency
(50/60Hz)
Magnetic field
IEC61000-4-8
3 A/m 3 A/m If incorrect
operation
occurs, it may
be necessary to
position the
Pulmolife further
from sources of
power frequency
magnetic fields
or to install
magnetic
shielding. The
power frequency
magnetic field
should be
measured in the
intended
installation
location to
assure that it is
sufficiently low.
NOTE UT is the a.c. mains voltage prior to application of the test level.