CareFusion PulmoLife, Instructions For Use Manual

Page: 11 / 156

English 7
PREDICTED VALUE SET UP
To change the Predicted Value Settings, from the default shown on the
box, hold down the On
and Enter keys together, and only
release when ‘Prd’ is displayed. Use the Scrolling Up / Down
keys to choose an alternative Predicted Value set.
1 ECCS
4
2 NHANES III
5
3 Asian (Chinese)
6
When the desired number is selected press the Enter key to
accept and save that predicted value set as default.
VERSION
To check the version number, hold down the On and Scrolling
Down keys together, and only release when ‘rE’ is displayed. The
version number will then be shown.
TROUBLE SHOOTING INFORMATION
Should you encounter problems operating your Pulmolife unit, please
consult the table below:
Problem Possible
Cause
Solution
Does not register a blow Turbine
incorrectly
fitted
Ensure turbine is tightly
pushed into the unit.
Unit does not turn on or
Solid “bAt” indicator is
displayed, while unit
beeps three times and
powers itself down after
5 seconds
Battery is
exhausted
Replace battery
Calibration Check failed
or cannot be completed
There are
leaks in the
syringe or
connections
Check the syringe and
connections for leaks
Turbine
may be
faulty
Repeat calibration
procedure, if problem still
persists, replace turbine
Shaft of the
syringe
being
pushed
down
The syringe should be
emptied and filled with one
smooth stroke, avoid
pushing down on the shaft
or banging at the end of
each manoeuver.