Cardinal ARMOR, Installation Manual

Page: 34 / 138

0330-0410-0M Rev D
•
Portable Digital Truck Scale
26
Refer to the Home run Connector Wiring Color Code Table below when
performing steps 4 through 7.
Homerun Connector Wiring Color Code Table
Connector
Signal
Homerun Cable
Wire Color
Wire Color if using a
Load Cell Cable
Pin Number Lever Color
1 BROWN SHLD GRAY BROWN
2 WHITE V+BUS RED WHITE
3 BLUE V-BUS BLACK BLUE
4 BLACK CAN H WHITE BLACK
5 GRAY CAN L BLUE or LIGHT BLUE GRAY
4. Looking at the end of the metal part of the connector where the wires are inserted, use your
fingernail and gently pull a wire clamp lever down away from the body of the connector.
5.
Insert the wire into the appropriate connector opening, and then close the wire clamp lever.
6. Verify that the wire is being held securely in the connector by lightly pulling on the wire.
7.
Repeat steps 4 through 6 until all five wires of the homerun cable are installed in the metal
part of the connector.
Insert wire, then close
wire clamp lever to
secure wire in connector.
Gently pull
down to
open wire
clamp lever.