8200-M628-O1 Rev A
212G/212GX Installation & Technical
Page 31
SETUP AND CALIBRATION, CONT.
Dual-Point with Zero (First Zero) Calibration
CAL1=
– FIRST CALIBRATION WEIGHT
The display will show
CAL1
=0
. This is the first of two calibration weights. This weight
could be ZERO (NO LOAD) or the TEST WEIGHTS / TEST LOAD.
If the first calibration weight is to be ZERO (NO LOAD), press the
ENTER
key.
If the first calibration weight is to be the TEST WEIGHTS / TEST LOAD, use the
numeric keys to input the value of the calibrated test weights.
NOTE!
When entering
values for
CAL1=
, the digits start displaying on the right side of the display and proceed
to the left. When large values are used (more than 3 digits), the
CAL1=
prompt will
automatically scroll off the left side of the display to show the additional digits on the
right as they are entered.
Place the weights on the scale platform and then press the
ENTER
key.
Starting at the left and proceeding right, a series of dashes will appear on the display.
The dashes will stay on the display momentarily, then disappear, after which the display
will show:
CAL2=
.
CAL2=
- SECOND CALIBRATION WEIGHT
The display will show
CAL2
=0
. This is the second of two calibration weights. This weight
could be ZERO (NO LOAD) or the TEST WEIGHTS / TEST LOAD.
If the second calibration weight is to be ZERO (NO LOAD), press the
ENTER
key.
If the second calibration weight is to be the TEST WEIGHTS / TEST LOAD, use the
numeric keys to input the value of the calibrated test weights.
NOTE!
When entering
values for
CAL2=
, the digits start displaying on the right side of the display and proceed
to the left. When large values are used (more than 3 digits), the
CAL2=
prompt will
automatically scroll off the left side of the display to show the additional digits on the
right as they are entered.
Place the weights on the scale platform and then press the
ENTER
key.
Starting at the left and proceeding right, a series of dashes will appear on the display.
The dashes will stay on the display momentarily and then disappear, after which the
display will show:
Sio?
.
Summary of Contents for 212G
Page 2: ...8200 M628 O1 Rev A 212G 212GX Installation Technical Page 2 ...
Page 10: ...8200 M628 O1 Rev A 212G 212GX Installation Technical Page 6 INSTALLATION CONT Figure No 2 ...
Page 27: ...8200 M628 O1 Rev A 212G 212GX Installation Technical Page 23 Lamp test on power up ...
Page 52: ...8200 M628 O1 Rev A 212G 212GX Installation Technical Page 48 ...