2
31
REMARKS
Before commencing with the installation of this appliance make sure
that you have read the following instructions carefully.
In particular familiarise yourself with the safety devices required by
the system, only then will you be able to use them to great effect.
Not all of the safety devices required by Italian or local safety stand-
ards have been taken into consideration in this manual.
The installer must make sure that any eventual safety devices re-
quired by the local standards and regulations have been installed
both ahead of and after the products described in this manual.
This appliance must be used exclusively for the purpose for which
it has been made. Any non authorised modifications are to be con-
sidered improper and therefore dangerous.
These instructions are aimed at professionally qualified “install-
ers of electrical equipment” in conformity with the standard “Nr.
46/5.3.1990”.
The manufacturer accepts no liability for damage caused by, or
situations arising from, the improper use of these appliances and
therefore all work carried out after the delivery of the appliance is to
be considered the complete responsibility of the installer.
Appendix A
Communications parameters
Using a P.C. fitted with a serial port controller the following parameters are
required
Speed: 1200 … 9600
Data bits:
8
Parity:
None
Stop bits:
1
Duplex: Full
Emulation:
VT100
Mode:
Answer
