13
20
15. If the MODE button is pressed with the answer “Y” on the display the system
will answer:
CODE N. ####
* S T O R E D *
This means that the transmitter code has been memorized by the system with the
progressive number: ####
16. If the MODE button is pressed with the answer “N” on the display the system
will show the start up message and no operations will be carried out:
17. To insert user information such as names or other forms of identification you
must be connected to a terminal.
STEP B: DELETING THE USER CODE
1.
Press the “Menu 1” button with an enabled transmitter inserted and the
following message will appear on the display:
ENTRY CODE
NUMBER = 0000
2. Repeatedly press the SET button to change the number indicated by the cursor
prompt (from 0 to 9);
3. Press the mode button to confirm the choice and move on to the next unit of the
number to be set;
4. Repeat operation 2 and 3 until the required code is completed;
5. After the last confirmation the system asks:
ARE YOU SURE ? Y
6. Press the MODE button to confirm or the SET button to change the answer;
7. If the answer Y is given the system answers with the following message:
1=DEL 2=DIS 3=EN
4=CH 0=OUT >> 0
8. Repeatedly press the SET button until a “1” appears in the option indicated by
the cursor prompt;
INTERFACING WITH A TERMINAL
All the on site operations carried out using the control buttons on the appliance
front panel may also be executed via terminal ( VT100 compatible terminal ) or via
a PC fitted with a serial interface controller. Once the connections have been car-
ried out as shown in fig. 4 pag. 8 and the correct communication parameters have
been set (see appendix A), press the <TAB> key on the keyboard
If the communication is correct the following message will appear on the screen:
ENTER PASSWORD [ 8 characters ] >> ........
If the system has just been initialised type in the generic password “12345678 “ ,
otherwise type in your personal password. If the password is correct you will be
given access to the main menu, otherwise the following message will appear on
the display:
** END ** [ type < TAB > for MENU ].
ATTENTION: The system is “Case Sensitive”, and makes a distinction between
uppercase and lowercase letters. This means that the password:” ABCDEFGH”
is different to the password “ABCDEFGh”.
If the introduced password is correct the following menu will appear on the
display
C A R D I N ACD-148 V. 3102 (1994) Cardin Elettronica S.p.A.
****
MAIN MENU
****
1. SYSTEM
2. USERS MANAGEMENT
3. GENERAL SETTINGS
4. PRINT UTILITIES
5. END
ENTER >>>
To enter one of the sub-menus press a number from 1 to 4; to exit the menu press
number 5 or <ESC>.
The program allows you to move between menus by pressing number keys and to
exit the system using the <ESC> key.
Each time a serial connection is made the following message will appear on the
display:
SERIAL LINK
CAUTION:
While the serial line is occupied the appliance is unable to receive
and process data via the radiocontrol inputs.
For this reason, if a two minute time period has passed during which no keys have
been pressed, the system will automatically return to the “ ON LINE” mode and
the following message will appear on the screen
SERIAL TIMEOUT
while the following message will appear on the ACD-148 display:
CA R D I N
*** ACD-148 ***
